Details
This adapter converts either a mSATA SSD or a M.2 NGFF SATA SSD into a 2.5" SATA drive
It can be used as a bootable disk and requires no extra driver. It is suitable for both PC and Mac systems.
Jumper switch design, you could easily adjust the switch to the SSD mode installed.
Support full size 50.95mm mSATA SSD.
Support NGFF M.2 SATA SSD ( 2230 2242 2260 2280) with Key B & Key B+M; Support Hi-Speed SATA3/ 6Gbps mass storage interface.

Product Description

Features:
- The all new 2-1 Thunder Board is the latest All in one M.2 & mSATA SSD to SATA Adapter in the market.
- Use it to easily connect any of the 6 different size M.2 or mSATA SSDs to any SATA port.
- Once connected the M.2 SSD shows on your desktop or laptop computer as a new partition.
- It can be used as a bootable disk and requires no extra driver.
- It is suitable for both PC and Mac systems.
- With read speed up to 520MB/s.

Notice:
If M.2 SSD inserted, the switch should be dialed to the NGFF. If mSATA SSD inserted, the switch should be dialed to the MSATA.

Specifications:
- Dimension: 1 x 81.5mm.
- M.2 (NGFF) & mSATA to SATA III Adapter board.
- Red LED indicates power status; Blue LED indicates active status.
- Support SATA Reversion 3.2.
- PCI Express M.2 Spec. Revision 0.7, Version 1.0.
- PCI Express Mini Card Electromechanical Spec. 1.2.
- Thermal shutdown protection.
- Short circuit protection, In-rush current suppression.

Support the following form factor M.2(NGFF) SSD:
Type 20-D2-B-M: 30mm(L) x 22mm(W)
Type 2242-D2-B-M: 42mm(L) x 22mm(W)
Type 22-D2-B-M: mm(L) x 22mm(W)
Type 2280-D2-B-M: 80mm(L) x 22mm(W)

Support the following form factor mSATA SSD:
Full size mSATA : 50.95mm(L) x 30mm(W)